In the world of jewelry making, rings may be one of the most fascinating and challenging works. From an ordinary piece of metal to a round and well-fitting ring, it requires not only inspiration and skills, but also a good tool. Among them, Ring Bending Tool is a tool that cannot be avoided when getting started with metalworking.
This article will introduce you to the basic structure and use of the ring bending tool, and share some knowledge on how to use it to accurately bend metal bars into the shape of a ring. While not a metal engraver tool itself, the ring bending tool plays a vital role in shaping the base material before the engraving process begins.If you are considering starting to make metal jewelry, this article will be more or less helpful to you.
What is Ring Bending Tool?
Ring bending tool is a tool specifically used to bend metal bars or wires into arcs or circles. Generally speaking, it is used more in the production of rings. According to the usage scenario, it is usually divided into two types:
Handheld bending pliers: The structure is similar to pliers, with an arc mold on one side and a corresponding press on the other side. It is suitable for light work or fine-tuning. It is recommended for beginners or simple crafts.
Desktop bending machine: It has a more stable base that can be fixed on the desktop and replaceable molds. It bends metal through the principle of lever, which can achieve more precise arc control and is suitable for formal metalworking studios.
Regardless of the form, their essence is to bend straight metal materials into the arc or ring we want through physical pressure.
Preparation before use
To successfully complete the bending of a ring, the preparation of the following materials is indispensable:
- Metal materials: Silver, copper, and brass are common choices, and soft metals are more suitable for beginners to practice.
- Measuring tools: rulers, calipers, and ring circumference charts are used to ensure accurate size.
- Cutting tools: saw blades or metal shears are used to cut metal strips of appropriate length.
Practical steps
Measure and cut the metal strip
Cut the appropriate metal strip according to the required ring size, plus a 1.5mm seam allowance. Make sure the edges are smooth to avoid difficulties in subsequent welding or grinding.
Install the die head
Replace the die on the ring bending tool with a diameter die head that matches the size of your target ring.
Position the metal strip
Place the metal strip between the dies and adjust the position to ensure that its center is aligned with the die.
Bend the metal
Slowly press the handle or lever down and let the pressure of the tool bend the metal strip evenly into a circle. If it feels too hard, it is recommended to anneal the metal first.
Remove and check the shape
After bending, remove the metal strip and check whether it is closed well. If necessary, tap it lightly with a rubber hammer to slightly adjust the shape, or use a ring die bar to adjust the arc.
Weld the seam (if necessary)
If you plan to make a closed ring, you can weld the seam at this stage and then grind it smooth to avoid cutting your fingers.
Beginner FAQ
Q1: Will the metal break when it is bent?
Usually it is caused by the metal being too hard or uneven force. It is recommended to use soft metal for operation or to anneal the harder metal first to soften it.
Q2: What if the bent ring is not round?
You can use a ring mold bar with a rubber hammer to slowly tap to adjust the roundness. Avoid too much force to deform the metal.
Q3: What if the ring is too big or too small?
It is key to make accurate measurements before starting. Beginners are advised to practice several times to find a length calculation method that suits them. After becoming proficient, the problem can be easily solved.
Q4:Where can I buy the right tool for me?
I recommend a website called katway, which has great products. In addition to the ring bending tool, there are many other tools to choose from.
Written at the end
The invention of the ring bending tool has greatly lowered the threshold for metalworking. As long as you master the basic operating procedures, you can use it to make beautiful and fitting rings whether you are in a small workshop at home or a professional studio.
If you are eager to try, you might as well give it a try - from an inconspicuous piece of metal bar to the process of making a ring by hand, it is not only healing but also full of sense of accomplishment. After all, who doesn't want a ring that belongs to him alone!