The IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 is a crucial component in various construction and engineering applications. This comprehensive guide explores its specifications, uses, and importance in modern construction projects. Whether you're a professional engineer or a construction specialist, understanding this threaded rod's characteristics is essential for successful project implementation.
What is IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210?
The IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 is a hot-dip galvanized threaded rod with specific dimensions and properties:
- Diameter: M24 (24mm)
- Length: 210mm
- Grade: 5.8
- Treatment: Zinc-coated (ZN) and Hot-Dip Galvanized (HDG)
Technical Specifications
Material Properties
The IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 features:
- Tensile strength: 520 N/mm²
- Yield strength: 400 N/mm²
- Elongation at break: ≥ 10%
- Surface hardness: 160-220 HV
Dimensional Characteristics
Key measurements of the IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 include:
- Thread pitch: 3mm
- Thread length: Full length
- Across flats: 36mm
- Core diameter: 20.319mm
Coating Specifications
Zinc Coating (ZN)
The zinc coating on the IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 provides:
- Minimum coating thickness: 45 µm
- Corrosion resistance
- Enhanced durability
- Uniform surface protection
Hot-Dip Galvanization (HDG)
The HDG treatment offers:
- Coating thickness: 55-85 µm
- Superior corrosion protection
- Extended service life
- Improved weather resistance
Applications and Uses
Construction Industry
The IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 is commonly used in:
- Structural steel connections
- Foundation anchoring
- Bridge construction
- Building frameworks
Industrial Applications
Common industrial uses include:
- Machine mounting
- Equipment installation
- Platform construction
- Heavy machinery anchoring
Installation Guidelines
Preparation
Before installing the IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210:
- Verify hole dimensions
- Clean the mounting surface
- Check thread condition
- Prepare necessary tools
Installation Steps
Follow these steps for proper installation:
- Position the rod correctly
- Apply appropriate torque
- Use compatible washers and nuts
- Verify alignment
Maintenance Requirements
Regular Inspection
Maintain the IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 by:
- Checking for corrosion
- Inspecting thread condition
- Verifying tightness
- Monitoring structural integrity
Preventive Measures
Extend the life of your IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 by:
- Keeping the area clean
- Protecting from chemical exposure
- Maintaining proper tension
- Addressing issues promptly
Safety Considerations
Installation Safety
When working with the IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210:
- Use appropriate PPE
- Follow torque specifications
- Ensure proper alignment
- Verify load calculations
Load Capacity
Understanding load limits:
- Maximum tensile load
- Shear strength
- Combined loading effects
- Safety factors
Quality Standards and Compliance
International Standards
The IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 meets:
- ISO 898-1
- DIN 933
- EN ISO 4014
- ASTM A563
Quality Testing
Regular testing includes:
- Dimensional verification
- Material composition analysis
- Coating thickness measurement
- Mechanical properties testing
Environmental Impact
Sustainability Features
The IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 contributes to sustainability through:
- Long service life
- Recyclable materials
- Minimal maintenance requirements
- Reduced replacement frequency
Environmental Protection
Environmental benefits include:
- Low environmental impact
- Reduced waste
- Energy-efficient production
- Sustainable coating processes
Cost Considerations
Initial Investment
Factors affecting cost:
- Material quality
- Coating specifications
- Quantity ordered
- Market conditions
Long-term Value
Cost benefits include:
- Extended service life
- Reduced maintenance
- Lower replacement frequency
- Improved reliability
Storage and Handling
Storage Requirements
Proper storage of IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210:
- Keep in dry conditions
- Avoid chemical exposure
- Maintain proper packaging
- Control temperature
Handling Guidelines
Best practices for handling:
- Use appropriate equipment
- Prevent thread damage
- Maintain cleanliness
- Follow safety protocols
Troubleshooting Common Issues
Installation Problems
Common issues include:
- Thread misalignment
- Improper torque
- Coating damage
- Fit problems
Solutions
Remedial actions:
- Verify specifications
- Use correct tools
- Follow installation guidelines
- Seek professional assistance
Future Developments
Technology Advances
Upcoming improvements in:
- Coating technology
- Material strength
- Production efficiency
- Quality control
Market Trends
Industry developments:
- Increased automation
- Enhanced specifications
- Improved testing methods
- Advanced applications
Conclusion
The IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210 represents a crucial component in modern construction and industrial applications. Its combination of strength, durability, and corrosion resistance makes it an ideal choice for various projects. Understanding its specifications, proper installation, and maintenance requirements ensures optimal performance and longevity.
FAQ Section
Common Questions
- What is the load capacity of IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210?
- How long does the coating last?
- Can it be used in outdoor applications?
- What maintenance is required?
- Are special tools needed for installation?
Expert Answers
Detailed responses addressing:
- Technical specifications
- Application requirements
- Installation procedures
- Maintenance needs
- Safety considerations
This comprehensive guide provides valuable information about the IGE Filetée ZN 5.8 / HDG 5.8 M24 x 210, ensuring proper understanding, application, and maintenance of this essential construction component.